Install raceway wires, LED, rope and indirect lighting in Foam Crown Molding

Creative Crown foam crown moldings allow you to install indirect lighting and cables with total ease!
Perfect crown molding to hide raceway wires!
Simply apply two beads of painters caulk horizontally along the back of the molding and press to your wall. Wipe off any excess caulk.
You have installed your molding and caulked the seams in one easy step!
The best and most inexpensive way to install raceway wires and LED lighting.

Creative Crown foam crown moldings allow you to install wiring where you have limited or no access to attics.
You can install your wiring and add a decorative look to your room

Just install the molding on the wall with our flat-back crown moldings. All you need is two beads of painters caulk.	Now lay in your rope or LED light strips into the channel on top of the molding. No fasteners are needed!
LED strips lights with the room lights off.	Incandescent rope lights with the room lights off.
Creative Crown foam crown moldings shown with incandescent and LED lighting sources. Our foam crown moldings just install to the wall with painters caulk in minutes. No brackets, clips, fasteners or connectors are needed! Just lay your light strips on top of our crown moldings.
Easy to install Creative Crown molding Just lay in LED lighting strips	Wood molding and drilled brackets This is the hard way!
Easy to install Creative Crown molding with lay in LED	Easy to install Creative Crown molding with lay in Incandescent rope lights

Available Sample Packs