Looking for a wall finish that’s both good looking and low-maintenance, and works just as well outdoors as it does indoors? WPC Wall Panels (Wood-Plastic Composite) are a durable solution for everything from living rooms and hallways to patios, balconies and building facades.
These panels combine the natural look of wood with the strength and weather resistance of composite materials.
This guide will walk you through the complete installation process for WPC Wall Panels, including pro tips and all the essential steps to help you get a great finish.
Before We Get into the “How To’s”, Let’s Address Why WPC Wall Panels are Such a Great Design Option
Here’s some reasons why WPC Wall Panels are such a smart choice:
Built for Indoors & Outdoors
Perfect for feature walls, accent areas, building exteriors or covered outdoor installations.
Weather-Resistant
Designed to withstand rain, sun, humidity and temperature changes without warping or fading.
Low-Maintenance
No painting or sealing required, just install and enjoy.
Eco-Friendly
Made from recyclable plastic and wood fiber for a sustainable finish.
Equipment needed for your WPC panel installation
For a smooth installation of your wall panels, make sure you have the following equipment on hand and ready to use:
- WPC Wall panels + corners pieces (if applicable)
- Wooden joists
- Screws
- Level
- Measuring tape
- Saw or panel cutter
- Screwdriver or drill
WPC Wall Panel Step-by-step Installation Guide
1. Install Joists on the Selected Wall
Secure the wooden joists horizontally onto the wall where the panels will be installed. Use a level to confirm that each joist is perfectly aligned. This ensures your panels will sit straight and flush.
Pro tip: Ensure joists are spaced evenly for proper panel support.
2. Cut the Panels to the Required Measurements
Measure the wall height and width, then trim your panels as needed to fit. Use a fine-tooth saw or panel cutter for clean edges.
Tip: Always measure twice and cut once for precise fitting. Want to know more? See our 10 tips on how to measure like a pro.
3. Set the First Panel on the Joists
Position the first panel on the joists and fasten it securely.
Then, connect the next panel to the edge of the first and install it.
Check that the second panel is properly aligned before securing.
4. Repeat the Process Until the Wall is Covered
Continue attaching panels, one at a time, checking for level as you go.
Make sure each panel fits tightly with the previous one for a seamless look.
5. Cut Corners to the Required Measurements
Measure and cut the decorative corner pieces to match the height and edges of the wall.
6. Place the Corners
Install the corner pieces to complete the look and cover any exposed panel edges.
Ensure they sit flush with the panels and are firmly secured.
Project Complete!
Enjoy your updated wall with great looking panels. This method delivers a clean and durable finish that’s perfect for your interior or exterior.
If you need any help during the process, please don’t hesitate to contact our friendly team of experts.
Quick Tips from the Pros:
- Start from a focal point (like the center of the wall or a clean edge) to ensure a symmetrical layout.
- Use stainless steel screws suitable for exterior use to prevent rust.
- Allow panels to acclimate to the installation environment (especially outdoors) for 24–48 hours before cutting or mounting.
- Check panel orientation, slats should be vertical for drainage if used outdoors.
Recap: Create a WPC Feature Wall in 6 Steps
- Install joists on the selected wall
- Cut the panels to the required measurements
- Set the first panel on the joists
- Repeat the process until the wall is covered
- Cut corners to the required measurements
- Place the corners
