Effulgent Sun - FAD Hand Painted Ceiling Rings - #CCRF-001

$688.85
Model No.
CCRF-001
Condition:
New
Availability:
Pre-Order
Diameter:
58"
Inside Diameter:
37"
Projection:
1"
Weight:
4.6 lbs
Material:
Urethane
Color:
Antique Bronze, Olympic Gold
Special Note 1:
If exterior setting is chosen a sealer coat should be applied for protection and durability, $15.00 will be added to the price. Also all images displayed in Low Luster If Gloss Finish is chosen, $15.00 will be added to the price.
Special Note 2:
4 pieces set. 4 pieces make one full ring.
Return Policy:
This finish is hand painted to order in the USA and returns are not allowed. Consider ordering samples first to check quality and finish.
Effulgent Sun - FAD Hand Painted Ceiling Rings - #CCRF-001

Images are not true representations of the actual color of the product, some are computer generated. Be sure to order samples to make sure the colors will work for you.

How many tiles do I need?:


Ceiling / Wall Tile Project Estimator
* Enter your ceiling area of room
Length ft.&Width  ft.
or total area in square feet.
* Enter your ceiling tiles size
  
Minimum number of tiles needed
Tiles needed with 15% of waste
Minimum number of Instant Grab adhesive #310 (Caulk gun needed)
Note: It is important to add a 15% more tiles to this number for waste.

Moldings Project Estimator
* Enter linear footage of room in
Length ft.&Width  ft.
or total area in linear feet.
* Type
  
Minimum units of Moldings needed
Coverage area ln. ft.
Moldings needed with 15% of waste
Note: It is important to add a 15% more moldings to this number for waste.
Wall Panels Project Estimator
* Enter your wall area of room in
Length ft.&Width  ft.
or total area in Square feet.
* Type
  
Minimum units of Wall Panels Pack needed
Coverage area sq. ft.
Wall Panels Pack needed with 15% of waste
Minimum number of Instant Grab adhesive #310 (Caulk gun needed)
Note: It is important to add a 15% more Wall Panels Pack to this number for waste.

Do you like the look of this product but need help with installation? Learn more in our 'How To' section or get assistance from a professional installer.

Our ceiling rings are manufactured with a dense architectural polyurethane compound (not Styrofoam) that allows it to be semi-flexible and 100% waterproof. This material is delivered pre-primed for paint. It is installed with architectural adhesive and/or finish nails. It can also be finished with caulk, spackle and your choice of paint, just like wood or MDF. A major advantage of polyurethane is that it will not expand, constrict or warp over time with changes in temperature or humidity. It's safe to install in rooms with the presence of moisture like bathrooms and kitchens. This product will not encourage the growth of mold or mildew, and it will never rot.

Ceiling medallions, domes and rings are for decorative use only and should never be used to support any type of fixture or structure. Fans and lights must be supported by the electrical box or other means.

  • Safe to install indoors or outdoors
  • Will not absorb moisture
  • Is lightweight and durable against average wear
  • Recommended tools for installation
    • Nailgun & air compressor (set at 100 PSI or less)
    • Adhesive
    • Spackle
    • Caulk
    • Tape measure

Our ceiling rings are manufactured with a dense architectural polyurethane compound (not Styrofoam) that allows it to be semi-flexible and 100% waterproof. This material is delivered pre-primed for paint. It is installed with architectural adhesive and/or finish nails. It can also be finished with caulk, spackle and your choice of paint, just like wood or MDF. A major advantage of polyurethane is that it will not expand, constrict or warp over time with changes in temperature or humidity. It's safe to install in rooms with the presence of moisture like bathrooms and kitchens. This product will not encourage the growth of mold or mildew, and it will never rot.

Ceiling medallions, domes and rings are for decorative use only and should never be used to support any type of fixture or structure. Fans and lights must be supported by the electrical box or other means.

  • Safe to install indoors or outdoors
  • Will not absorb moisture
  • Is lightweight and durable against average wear
  • Recommended tools for installation
    • Nailgun & air compressor (set at 100 PSI or less)
    • Adhesive
    • Spackle
    • Caulk
    • Tape measure
Get News & Offers!