DIY Vaulted Foam Crown Molding - 5 in. Wide 8 ft. Long - #CC 453V

$20.16
Model No.
CC453V
Condition:
New
Availability:
InStock
Material:
Styrofoam
Color:
Plain White
Molding Length:
95.5"
Paintable:
Yes (Water-based paints)
Installation Method:
Glue-up (Instant Grab #310)
Type:
Vaulted Crown Molding
Accessories:
Pre-Cut Crown Molding Corner
Accessories:
Touch Up Paint | Glue
Custom Finishing:
We can paint the moldings with any water based paints of your choice. Please contact us for a custom quote.
Return Policy:
30 Days Return Policy
DIY Vaulted Foam Crown Molding - 4.5" Wide 95.5" Long - #CC 453V

Images are not true representations of the actual color of the product, some are computer generated. Be sure to order samples to make sure the colors will work for you.

How many tiles do I need?:


Ceiling / Wall Tile Project Estimator
* Enter your ceiling area of room
Length ft.&Width  ft.
or total area in square feet.
* Enter your ceiling tiles size
  
Minimum number of tiles needed
Tiles needed with 15% of waste
Minimum number of Instant Grab adhesive #310 (Caulk gun needed)
Note: It is important to add a 15% more tiles to this number for waste.

Moldings Project Estimator
* Enter linear footage of room in
Length ft.&Width  ft.
or total area in linear feet.
* Type
  
Minimum units of Moldings needed
Coverage area ln. ft.
Moldings needed with 15% of waste
Note: It is important to add a 15% more moldings to this number for waste.
Wall Panels Project Estimator
* Enter your wall area of room in
Length ft.&Width  ft.
or total area in Square feet.
* Type
  
Minimum units of Wall Panels Pack needed
Coverage area sq. ft.
Wall Panels Pack needed with 15% of waste
Minimum number of Instant Grab adhesive #310 (Caulk gun needed)
Note: It is important to add a 15% more Wall Panels Pack to this number for waste.

Do you like the look of this product but need help with installation? Learn more in our 'How To' section or get assistance from a professional installer.

profile-image.jpg

DIY foam crown moldings are easy to cut and install with our flat back design. Designed for angled, cathedral, sloped and vaulted ceilings. (95.5" lengths). Our 4-1/2" Vaulted polystyrene foam crown moldings are a good size for 10-14+ foot ceiling heights. 8-9 foot is where the ceiling starts and goes upward.

Mounting for our regular flat vaulted back moldings

Installs on flat 45 degree downward ceilings

Installs on flat 45 degree downward ceilings

 Installs on flat 90 degree ceilings

Installs on flat 90 degree ceilings

 Installs on angled, sloped / ceilings up to 135 degrees

Installs on angled, sloped / ceilings up to 135 degrees

 Just slide it up the wall until the top of the molding comes in contact

Just slide it up the wall until the top of the molding comes in contact

Use these corners on vaulted, angled and cathedral ceilings with the foam crown molding going up or down from 90-135 degrees.

Vaulted up right corner Vaulted up left corner
Vaulted down right corner Vaulted down left corner

profile-image.jpg

DIY foam crown moldings are easy to cut and install with our flat back design. Designed for angled, cathedral, sloped and vaulted ceilings. (95.5" lengths). Our 4-1/2" Vaulted polystyrene foam crown moldings are a good size for 10-14+ foot ceiling heights. 8-9 foot is where the ceiling starts and goes upward.

Mounting for our regular flat vaulted back moldings

Installs on flat 45 degree downward ceilings

Installs on flat 45 degree downward ceilings

 Installs on flat 90 degree ceilings

Installs on flat 90 degree ceilings

 Installs on angled, sloped / ceilings up to 135 degrees

Installs on angled, sloped / ceilings up to 135 degrees

 Just slide it up the wall until the top of the molding comes in contact

Just slide it up the wall until the top of the molding comes in contact

Use these corners on vaulted, angled and cathedral ceilings with the foam crown molding going up or down from 90-135 degrees.

Vaulted up right corner Vaulted up left corner
Vaulted down right corner Vaulted down left corner
Get News & Offers!